Review of Pop 16:2

Basic specs.

The Pop 16:2 is a small sailboat designed by the Swedish maritime architect Per Brohäll in the late sixties. Several hundred boats have been produced. The Pop 16:2 is built by the Swedish yard Odensfors Båt.

Here we would have liked to show you nice photos of the Pop 16:2.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Pop 16:2 or similar boat for sale

Interior

Note: the boat has also been sold to be self-made/-interiored, which means that the quality of each boat may vary.

Rig

The boat equipped with a fractional rig. A fractional rig has smaller headsails which make tacking easier, which is an advantage for cruisers and racers, of course. The downside is that having the wind from behind often requires a genaker or a spinnaker for optimal speed.

Engine

An outboard motor is often used on this boat. In that case the boat will typically require a power of 1 - 2 hp, alternatively 22 - 26 lbs thrust if you prefer an electrical motor. Electric outboards are becoming popular for sailboat owners who want clean instant power with less noise and no exhaust fumes.

Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Stability and Safety

What is Capsize Screening Formula (CSF)?

The capsize screening value for Pop 16:2 is 2.41, indicating that this boat would not be accepted to participate in ocean races.

Theoretical Maximum Hull Speed

What is Theoretical Maximum Hull Speed?

The theoretical maximal speed of a displacement boat of this length is 5.1 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.

Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Pop 16:2 is about 55 kg/cm, alternatively 310 lbs/inch.
Meaning: if you load 55 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 310 lbs cargo on the boat it will sink 1 inch.

Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

Motion Comfort Ratio

What is Motion Comfort Ratio (MCR)?

The Motion Comfort Ratio for Pop 16:2 is 10.0.

Comparing this ratio with similar sailboats show that it is more comfortable than 69% of all similar sailboat designs. This comfort value is just above average.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Pop 16:2 is 2.61.

Compared with other similar sailboats it is more spacy than 50% of all other designs. It seems that the designer has chosen an average hull design.

D/L (Displacement Length Ratio)

What is Displacement Length Ratio?

The DL-ratio for Pop 16:2 is 169 which categorizes this boat among 'light racers'.

42% of all similar sailboat designs are categorized as heavier. A heavy displacement combined with smaller water plane area has lower acceleration and is more comfortable.

SA/D (Sail Area Displacement ratio)

What is SA/D (Sail Area Displacement ratio)?

The SA/D for Pop 16:2 with ISO 8666 reference sail is 17.9, with a 135% genua the SA/D is 19.9.

The SA/D ratio indicates that it is faster than 62% of all similar sailboat designs in light wind.

RSP (Relative Speed Performance)

What is Relative Speed Performance?

The Relative Speed Performance for Pop 16:2 is 31

The relative speed performance is 31 which means that a it is faster than 31% of all similar sailboat designs.

Maintenance

Rig

Dimensions of sail for fractional rig.

Are your sails worn out? You might find your next sail here: Sails for Sale

If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.

**Guiding dimensions of running rig**
Usage	Length		Diameter
Mainsail halyard	15.1 m	(49.4 feet)	6 mm	(1/4 inch)
Jib/genoa halyard	15.1 m	(49.4 feet)	6 mm	(1/4 inch)
Spinnaker halyard	15.1 m	(49.4 feet)	6 mm	(1/4 inch)
Jib sheet	5.0 m	(16.2 feet)	8 mm	(5/16 inch)
Genoa sheet	5.0 m	(16.2 feet)	8 mm	(5/16 inch)
Mainsheet	12.4 m	(40.6 feet)	8 mm	(5/16 inch)
Spinnaker sheet	10.9 m	(35.7 feet)	8 mm	(5/16 inch)
Cunningham	2.8 m	(9.0 feet)	6 mm	(1/4 inch)
Kickingstrap	5.5 m	(18.0 feet)	6 mm	(1/4 inch)
Clew-outhaul	5.5 m	(18.0 feet)	6 mm	(1/4 inch)

Boat owner's ideas

This section shown boat owner's changes, improvements, etc. Here you might find inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what to look for.

Finally

We are always looking for new photos. If you can contribute with photos for Pop 16:2 it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.

References

[Ref 1]: ISO 8666 Small craft — Principal data.
[Ref 3]: ISO 12215-5 Small craft — Hull construction and scantlings.