Udkik.dk

Review of Mamba 311


Mamba 311
Mamba 311 anno 1984.

Basic specs.

sail specifications
The Mamba 311 is a sailboat designed by the Swedish maritime architect Bengt Karlsson in the early eighties. The Mamba 311 is built by the Swedish yard BK Marin AB.

Looking for a new boat? Find a Mamba 311 or similar boat for sale

Hull
The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season. And outside the sailing season, just bottom cleaning and perhaps anti-fouling painting once a year - a few hours of work, that's all.

Interior
Floor plan
Floor plan of Mamba 311.

Rig
Rig
Rig of Mamba 311 anno 1984. Photo of Miss Conduct
The boat has more than one rig.

One option is a fractional rig. A fractional rig has smaller headsails which make tacking easier, which is an advantage for cruisers and racers, of course. The downside is that having the wind from behind often requires a genaker or a spinnaker for optimal speed.

Another option is a masthead rig. The advantage of a masthead rig is its simplicity and the fact that a given sail area - compared with a fractional rig - can be carried lower and thus with less heeling moment.

Keel
Keel
Keel of Mamba 311.

Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Stability and Safety

What is Capsize Screening Formula (CSF)?

The capsize screening value for Mamba 311 is 2.04, indicating that this boat would not be accepted to participate in ocean races.


Theoretical Maximum Hull Speed

What is Theoretical Maximum Hull Speed?

The theoretical maximal speed of a displacement boat of this length is 6.9 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.


Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Mamba 311 is about 164 kg/cm, alternatively 921 lbs/inch.
Meaning: if you load 164 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 921 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

Motion Comfort Ratio

What is Motion Comfort Ratio (MCR)?

The Motion Comfort Ratio for Mamba 311 is 19.8.

Low High 27% 0 50 100
Comparing this ratio with similar sailboats show that it is more comfortable than 27% of all similar sailboat designs. This comfort value is just below average.


L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Mamba 311 is 3.05.

Slim Wide 58% 0 50 100
Compared with other similar sailboats it is more spacy than 58% of all other designs. It seems that the designer has chosen a slightly more spacy hull design.


D/L (Displacement Length Ratio)

What is Displacement Length Ratio?

The DL-ratio for Mamba 311 is 190 which categorizes this boat among 'light racers'.

Heavy Light 79% 0 50 100
79% of all similar sailboat designs are categorized as heavier. A light displacement requires less sailarea and has higher accellerations.


SA/D (Sail Area Displacement ratio)

What is SA/D (Sail Area Displacement ratio)?

The SA/D for Mamba 311 with ISO 8666 reference sail is 15.9, with a 135% genua the SA/D is 19.1.

Low High 46% 0 50 100
The SA/D ratio indicates that it is faster than 46% of all similar sailboat designs in light wind.


RSP (Relative Speed Performance)

What is Relative Speed Performance?

The Relative Speed Performance for Mamba 311 is 50

Slow Fast 50% 0 50 100
The relative speed performance is 50 which means that a it is faster than 50% of all similar sailboat designs.


Maintenance

Rig

Dimensions of sail for masthead rig.

mainsail specifications genoa specifications spinnaker specifications

Are your sails worn out? You might find your next sail here: Sails for Sale



If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.



Guiding dimensions of running rig
Masthead rig
UsageLengthDiameter
Mainsail halyard 27.1 m(88.7 feet)10 mm(3/8 inch)
Jib/genoa halyard27.1 m(88.7 feet)10 mm(3/8 inch)
Spinnaker halyard27.1 m(88.7 feet)10 mm(3/8 inch)
Jib sheet 9.3 m(30.7 feet)12 mm(1/2 inch)
Genoa sheet9.3 m(30.7 feet)12 mm(1/2 inch)
Mainsheet 23.4 m(76.7 feet)12 mm(1/2 inch)
Spinnaker sheet20.6 m(67.5 feet)12 mm(1/2 inch)
Cunningham3.0 m(9.8 feet)10 mm(3/8 inch)
Kickingstrap6.0 m(19.7 feet)10 mm(3/8 inch)
Clew-outhaul6.0 m(19.7 feet)10 mm(3/8 inch)
Fractional rig
UsageLengthDiameter
Mainsail halyard 30.2 m(99.1 feet)10 mm(3/8 inch)
Jib/genoa halyard30.2 m(99.1 feet)10 mm(3/8 inch)
Spinnaker halyard30.2 m(99.1 feet)10 mm(3/8 inch)
Jib sheet 9.3 m(30.7 feet)12 mm(1/2 inch)
Genoa sheet9.3 m(30.7 feet)12 mm(1/2 inch)
Mainsheet 23.4 m(76.7 feet)12 mm(1/2 inch)
Spinnaker sheet20.6 m(67.5 feet)12 mm(1/2 inch)
Cunningham3.5 m(11.5 feet)10 mm(3/8 inch)
Kickingstrap7.0 m(23.0 feet)10 mm(3/8 inch)
Clew-outhaul7.0 m(23.0 feet)10 mm(3/8 inch)

Boat owner's ideas

This section shown boat owner's changes, improvements, etc. Here you might find inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what to look for.



Finally

We are always looking for new photos. If you can contribute with photos for Mamba 311 it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References