Udkik.dk

Review of Bénéteau 41s5


Basic specs.

sail specifications
The Bénéteau 41s5 is a large sailboat. The Bénéteau 41s5 is built by the French yard Bénéteau.

Here we would have liked to show you nice photos of the Bénéteau 41s5.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Bénéteau 41s5 or similar boat for sale

Hull
The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season.

Keel

The Bénéteau 41s5 is equipped with a fin keel. A boat with a fin keel is more manoeuvrable but has less directional stability than a similar boat with a long keel.But be aware that even though a Wing Keel keel is very good for speed racing, a fishing nets and the like in the water can easily make you into a troublesome situation.


Engine

The boat is typically equipped with an engine.


Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Theoretical Maximum Hull Speed

What is Theoretical Maximum Hull Speed?

The theoretical maximal speed of a displacement boat of this length is 7.6 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

Sorry, we do not have sufficient statistical information available for this boat to provide a significant reliable analysis.

Maintenance

Rig

Dimensions of sail.

mainsail specifications headsail specifications

Are your sails worn out? You might find your next sail here: Sails for Sale



If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.



Guiding dimensions of running rig
UsageLengthDiameter
Mainsail halyard 39.8 m(130.5 feet)12 mm(1/2 inch)
Jib/genoa halyard39.8 m(130.5 feet)12 mm(1/2 inch)
Spinnaker halyard39.8 m(130.5 feet)12 mm(1/2 inch)
Jib sheet 12.6 m(41.3 feet)14 mm(0.55 inch)
Genoa sheet12.6 m(41.3 feet)14 mm(0.55 inch)
Mainsheet 31.5 m(103.3 feet)14 mm(0.55 inch)
Spinnaker sheet27.7 m(90.9 feet)14 mm(0.55 inch)
Cunningham5.1 m(16.7 feet)12 mm(1/2 inch)
Kickingstrap10.2 m(33.4 feet)12 mm(1/2 inch)
Clew-outhaul10.2 m(33.4 feet)12 mm(1/2 inch)

Boat owner's ideas

This section shown boat owner's changes, improvements, etc. Here you might find inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what to look for.



Finally

We are always looking for new photos. If you can contribute with photos for Bénéteau 41s5 it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References