Udkik.dk

Review of Nordwest 24


Nordwest 24
Nordwest 24 anno 1981.

Basic specs.

sail specifications
The Nordwest 24 is a small sailboat designed in the late seventies. The Nordwest 24 is built by the Danish yard GEFA.

Looking for a new boat? Find a Nordwest 24 or similar boat for sale

Interior
The boat is equipped with 4 berths.
Note: the boat has also been sold to be self-made/-interiored, which means that the quality of each boat may vary.

Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Stability and Safety

What is Capsize Screening Formula (CSF)?

The capsize screening value for Nordwest 24 is 2.19, indicating that this boat would not be accepted to participate in ocean races.


Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Nordwest 24 is about 122 kg/cm, alternatively 684 lbs/inch.
Meaning: if you load 122 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 684 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Nordwest 24 is 2.92.

Slim Wide 54% 0 50 100
Compared with other similar sailboats it is more spacy than 54% of all other designs. It seems that the designer has chosen a slightly more spacy hull design.


RSP (Relative Speed Performance)

What is Relative Speed Performance?

The Relative Speed Performance for Nordwest 24 is 73

Slow Fast 73% 0 50 100
The relative speed performance is 73 which means that a it is faster than 73% of all similar sailboat designs.


Maintenance

Rig

If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.



Guiding dimensions of running rig
UsageLengthDiameter
Jib sheet 7.3 m(24.0 feet)10 mm(3/8 inch)
Genoa sheet7.3 m(24.0 feet)10 mm(3/8 inch)
Mainsheet 18.2 m(59.9 feet)10 mm(3/8 inch)
Spinnaker sheet16.1 m(52.7 feet)10 mm(3/8 inch)

Boat owner's ideas

This section shown boat owner's changes, improvements, etc. Here you might find inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what to look for.



Finally

We are always looking for new photos. If you can contribute with photos for Nordwest 24 it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References