Udkik.dk

Review of Kings Cruiser 29


Kings Cruiser 29
Kings Cruiser 29 anno 1970.


Basic specs.

sail specifications
The Kings Cruiser 29 is a sailboat designed by the Swedish maritime architect Tord Arne Sundén in the late sixties.

Looking for a new boat? Find a Kings Cruiser 29 or similar boat for sale

Hull
The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season. And outside the sailing season, just bottom cleaning and perhaps anti-fouling painting once a year - a few hours of work, that's all.

Interior
The interior is like most other boats made of teak.
The boat is equipped with 2 cabins, 4 berths, a galley and toilet facility.

Rig
The boat equipped with a masthead rig. The advantage of a masthead rig is its simplicity and the fact that a given sail area - compared with a fractional rig - can be carried lower and thus with less heeling moment.

Keel
Keel
Keel of Kings Cruiser 29 anno 1972.

Engine

The boat is typically equipped with an inboard Volvo Penta MD1B diesel engine at 10.0 hp (7 kW), which gives a max speed about 4.4 knots.


Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Stability and Safety

What is Capsize Screening Formula (CSF)?

The capsize screening value for Kings Cruiser 29 is 1.75, indicating that this boat could - if evaluated by this formula alone - be accepted to participate in ocean races.


Theoretical Maximum Hull Speed

What is Theoretical Maximum Hull Speed?

The theoretical maximal speed of a displacement boat of this length is 6.5 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.


Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Kings Cruiser 29 is about 118 kg/cm, alternatively 663 lbs/inch.
Meaning: if you load 118 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 663 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

Motion Comfort Ratio

What is Motion Comfort Ratio (MCR)?

The Motion Comfort Ratio for Kings Cruiser 29 is 24.8.

Low High 66% 0 50 100
Comparing this ratio with similar sailboats show that it is more comfortable than 66% of all similar sailboat designs. This comfort value is just above average.


L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Kings Cruiser 29 is 3.47.

Wide Slim 88% 0 50 100
Compared with other similar sailboats it is slimmer than 88% of all other designs. It seems that the designer has chosen a significantly more speedy hull design.


D/L (Displacement Length Ratio)

What is Displacement Length Ratio?

The DL-ratio for Kings Cruiser 29 is 236 which categorizes this boat among 'light crusers & offshore racers'.

Heavy Light 58% 0 50 100
58% of all similar sailboat designs are categorized as heavier. A light displacement requires less sailarea and has higher accellerations.


SA/D (Sail Area Displacement ratio)

What is SA/D (Sail Area Displacement ratio)?

The SA/D for Kings Cruiser 29 with ISO 8666 reference sail is 13.9, with a 135% genua the SA/D is 16.8.

Low High 24% 0 50 100
The SA/D ratio indicates that it is faster than 24% of all similar sailboat designs in light wind.


RSP (Relative Speed Performance)

What is Relative Speed Performance?

The Relative Speed Performance for Kings Cruiser 29 is 21

Slow Fast 21% 0 50 100
The relative speed performance is 21 which means that a it is faster than 21% of all similar sailboat designs.


Maintenance

Rig

Dimensions of sail for masthead rig.

mainsail specifications genoa specifications spinnaker specifications

Are your sails worn out? You might find your next sail here: Sails for Sale



If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.



Guiding dimensions of running rig
UsageLengthDiameter
Mainsail halyard 23.2 m(76.0 feet)8 mm(5/16 inch)
Jib/genoa halyard23.2 m(76.0 feet)8 mm(5/16 inch)
Spinnaker halyard23.2 m(76.0 feet)8 mm(5/16 inch)
Jib sheet 8.7 m(28.5 feet)10 mm(3/8 inch)
Genoa sheet8.7 m(28.5 feet)10 mm(3/8 inch)
Mainsheet 21.7 m(71.2 feet)10 mm(3/8 inch)
Spinnaker sheet19.1 m(62.7 feet)10 mm(3/8 inch)
Cunningham2.7 m(8.9 feet)8 mm(5/16 inch)
Kickingstrap5.4 m(17.7 feet)8 mm(5/16 inch)
Clew-outhaul5.4 m(17.7 feet)8 mm(5/16 inch)

Boat owner's ideas

This section shown boat owner's changes, improvements, etc. Here you might find inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what to look for.



Finally

We are always looking for new photos. If you can contribute with photos for Kings Cruiser 29 it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References