Udkik.dk

Review of Contest 62 CS


Basic specs.

sail specifications
The Contest 62 CS is a large sailboat designed by the maritime architect Georg Nissen in the early 2000. Only a few boats have been produced. The Contest 62 CS is built by the Dutch yard Conyplex B.V..

Here we would have liked to show you nice photos of the Contest 62 CS.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Contest 62 CS or similar boat for sale

Hull
The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season.
The hull is a double hull which improves the indoor climate. Especially when the water is colder than the air in the cabin, then the double hull insulates against cold water and reduce the condense water in the cabin.

Interior
The boat is equipped with 8+2 berths.

Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Stability and Safety

What is Capsize Screening Formula (CSF)?

The capsize screening value for Contest 62 CS is 1.81, indicating that this boat could - if evaluated by this formula alone - be accepted to participate in ocean races.


EU classification

Contest 62 CS holds one CE certification:

The boat is by European Union certified as Class A. OCEAN:
Designed for extended voyages where conditions may exceed wind force 8 (Beaufort scale) and significant wave heights of 4 m and above but excluding abnormal conditions, and vessels largely self-sufficient.


Theoretical Maximum Hull Speed

What is Theoretical Maximum Hull Speed?

The theoretical maximal speed of a displacement boat of this length is 9.9 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.


Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Contest 62 CS is about 613 kg/cm, alternatively 3435 lbs/inch.
Meaning: if you load 613 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 3435 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Contest 62 CS is 3.45.


Sorry, we do not have sufficient statistical information available for this boat to provide a significant reliable analysis.

Maintenance

Rig

If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.



Guiding dimensions of running rig
UsageLengthDiameter
Jib sheet 18.8 m(61.7 feet)16 mm(5/8 inch)
Genoa sheet 18.8 m(61.7 feet)16 mm(5/8 inch)
Mainsheet 47.0 m(154.2 feet)16 mm(5/8 inch)
Spinnaker sheet41.4 m(135.7 feet)16 mm(5/8 inch)

Boat owner's ideas

This section shown boat owner's changes, improvements, etc. Here you might find inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what to look for.



Finally

We are always looking for new photos. If you can contribute with photos for Contest 62 CS it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References